LO Pro530 (500x300) Turnkey CO2 laser machine

General Forum Stuff...Introduce yourself

LO Pro530 (500x300) Turnkey CO2 laser machine

Postby Speedythinker » Thu May 05, 2016 6:11 pm

Hi folks:

I just came back from China last night. I'm so excited to inform you guys that the development of LO PR530 high speed Desktop laser machine is almost completed. A prototype is made there and the first batch of production (50units) will be started in the middle of May. It is most likely that we will receive the PR530 by the mid of July. Our price is $3,495. LO600W water chiller is $450 which is capable to handle a 80W tube in full operation. The PR530 equipped with E5 DSP controller that is capable to handle ramp engraving (Stamp making). We're in the process of adding greyscale engraving feature. A power Z table is included with the price!!

See more information here: http://lightobject.info/viewforum.php?f=77

PR530F1.jpg


If you have any question, feel free to email us or post your question on the forum


Regards,
Marco
LightObject
Speedythinker
 
Posts: 129
Joined: Wed Oct 19, 2011 12:06 am

Re: LO Pro530 (500x300) Turnkey CO2 laser machine

Postby Speedythinker » Thu Sep 29, 2016 7:28 pm

We will start to sell it on or after Oct 5th
http://www.lightobject.com/Product3.asp ... egoryId=77


Marco
LightObject.com
Speedythinker
 
Posts: 129
Joined: Wed Oct 19, 2011 12:06 am

Re: LO Pro530 (500x300) Turnkey CO2 laser machine

Postby Schramm » Fri May 26, 2017 6:00 am

Are you still going to sell this one? $3,495 is expensive but I may need one.
Schramm
 
Posts: 1
Joined: Fri May 19, 2017 9:59 am

Re: LO Pro530 (500x300) Turnkey CO2 laser machine

Postby Techgraphix » Fri May 26, 2017 9:46 am

Schramm wrote:$3,495 is expensive

It's not expensive, just a lot of money ;)
Anyway, the machine looks great from that single picture..

Kees
Techgraphix
 
Posts: 101
Joined: Fri Feb 24, 2012 8:37 pm
Location: Appelscha, NL

Re: LO Pro530 (500x300) Turnkey CO2 laser machine

Postby Speedythinker » Fri Jun 16, 2017 5:00 pm

We now sell it for under $3,000!
It is not those small blue box your found on eBay can compare with.
Our machine runs much smooth, quiet, and faster. It comes with a mini DSP controller board and beam combiner (red dot). Not mentioned that it comes with a power Z table. For this price, you hardly find a competitor can come up something closed. When you bring this machine for production, don't complain that you make enough to cover the cost in less than a week! :mrgreen:


Marco
Speedythinker
 
Posts: 129
Joined: Wed Oct 19, 2011 12:06 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests